Moment® Threaded Lifting Loops
The Moment® Threaded Lifting Loop is manufactured from high grade steel wire, swaged in a steel ferrule and finished with zinc plating. Designed for use with a threaded lifting socket, it provides a versatile and economic method of lifting precast units and are suitable for most applications, particularly site operations. Loops are available from 16 to 36 mm sizes in Rd thread types. The load capacity for each application is to be taken from the corresponding tables.
The Threaded Lifting Loops can be subjected to a diagonal lift up to 45°. If a transverse loading is to be applied, a Swivel Lifting Eye should be used to allow the lifting link to rotate through 360°.
Threaded Lifting loops should only be attached to the unit after the concrete strength has reached 15 MPa. In some cases it may be economic and practical to leave the loops with the unit until final installation.
A wide range of Moment® Threaded Lifting Loop from 1.2T to 6.3T
Moment® Wavy And Straight Tail Lifting Socket Anchors
Moment® Wavy and Straight Tail Lifting Socket Anchors are economic lifting system to transport thin-walled precast components such as walls, flat panels etc. Even precast mansory wall components can be transported with this Wavy and Straight Tail Lifting Socket Anchors. It can be fixed to formwork by a plastic nail plate or magnetic socket holder.
The key benefits and features for Wavy and Straight Tail Lifting Socket Anchors are as per below:
• Available in Zinc Plated with Rd thread
• The socket is anchored into the concrete unit using its integral reinforcement bar.
• Quick and easy to fix into unit
• Typically used in beams, panels and walls
A wide range of Moment Wavy and Straight Tail Lifting Socket Anchors from 1.2T to 6.3T
Never Compromise On Quality.
Let Us Drop You A Call For Free Consultation.
Moment® Threaded Lifting Sockets
Threaded Lifting Sockets are economic and have advantages in thin components, where the long tail provides excellent anchorage. The reinforcement tail is essential and must be installed and fitted to transfer the load into the concrete as shown.
Threaded Lifting Sockets are available in Zinc plated and stainless steel both with Rd threads. These sockets are specially made for lifting are not to be confused with fixing sockets. For thin units that have to be turned through 180° from mould to final position, Threaded Lifting Sockets can be made double threaded to pass right through the unit.
Plastic Stopper Caps are also available to protect threads from weathering and ingress of dirt or foreign matter that can prevent the threads from engaging completely down the length of the socket
A wide range of Moment® Threaded Lifting Socket from 1.2T to 6.3T
Download Brochure For More Information
Related Products You May Be Interested